Troubleshooting - Yamaha XSR MTM690 2016 Service Manual

EAS30495

TROUBLESHOOTING

The starter motor fails to turn.
TIP
• Before troubleshooting, remove the following part(s):
1. Battery cover
2. Fuel tank center cover/Air scoops
3. Fuel tank
4. Throttle bodies/Air filter case
5. Drive sprocket cover
6. Headlight assembly
1. Check the fuses.
(Ignition, fuel injection system, and
main)
Refer to "CHECKING THE FUS-
ES" on page 8-157.
OK ↓
2. Check the battery.
Refer to "CHECKING AND
CHARGING THE BATTERY" on
page 8-158.
OK ↓
3. Check the starter motor operation.
Refer to "CHECKING THE START-
ER MOTOR OPERATION" on page
8-166.
NG ↓
4. Check the starter motor.
Refer to "CHECKING THE START-
ER MOTOR" on page 5-44.
OK ↓
5. Check the relay unit (starting circuit
cut-off relay).
Refer to "CHECKING THE RE-
LAYS" on page 8-161.
OK ↓
6. Check the relay unit (diode).
Refer to "CHECKING THE RELAY
UNIT (DIODE)" on page 8-163.
OK ↓
7. Check the starter relay.
Refer to "CHECKING THE RE-
LAYS" on page 8-161.
OK ↓
ELECTRIC STARTING SYSTEM
NG →
Replace the fuse(s).
NG →
• Clean the battery terminals.
• Recharge or replace the battery.
OK →
Starter motor is OK. Perform the electric
starting system troubleshooting, starting
with step 5.
NG →
Repair or replace the starter motor.
NG →
Replace the relay unit.
NG →
Replace the relay unit.
NG →
Replace the starter relay.
8-10