Yamaha XSR MTM690 2016 Service Manual page 359

TIP
Temporarily tighten the front fuel tank bracket
bolt.
2. Install:
• Fuel hose
ECA18420
NOTICE
When installing the fuel hose, make sure that
it is securely connected, and that the fuel
hose connector cover on the fuel hose is in
the correct position; otherwise, the fuel hose
will not be properly installed.
TIP
• Install the fuel hose securely onto the fuel rail
and fuel pump until a distinct "click" is heard.
• To install the fuel hose, slide the fuel hose con-
nector cover "1" on each end of the hose in the
direction of the arrow shown.
1
3. Connect:
• Fuel pump coupler
• Fuel tank breather hose
• Fuel tank overflow hose
• Intake air temperature sensor
4. Tighten:
• Rear fuel tank bracket bolts
Rear fuel tank bracket bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
5. Tighten:
• Front fuel tank bracket bolt
Front fuel tank bracket bolt
30 Nm (3.0 m·kgf, 22 ft·lbf)
7-6
FUEL TANK