Suzuki IGNIS 2022 Series Manual page 182

NOTE:
• Always shift the gearshift lever without
pushing in the knob button (1) except
when you shift from "P" to "R", from "D"
to "M" or "L", from "N" to "R" or from "R"
to "P". If you always push in the knob
button (1) when shifting the gearshift
lever, you could shift into "P", "R", "M" or
"L" by mistake.
• If driver's or passenger's knee hits the
gearshift lever while driving, the lever
could move and the gear could be
changed unexpectedly.
Use the gearshift lever positions as fol-
lows:
P (Park)
Use this position to lock the transmission
when the vehicle is parked or when start-
ing the engine. Shift into Park only when
the vehicle is completely stationary.
R (Reverse)
Use this position to reverse the vehicle
from stop. Make sure that vehicle is com-
pletely stationary before shifting into
Reverse.
CAUTION
For the vehicles with the keyless
push start system, if you cannot
press the engine switch firmly, the
engine may not start. Even if you shift
the gearshift lever into "R" or "D"
position without the engine running,
the vehicle does not move. If you try
to move your vehicle under the
above-mentioned condition, the vehi-
cle may move in unexpected direc-
tions on a slope, etc. This may cause
an accident. When starting
engine, press the engine switch
firmly. Also, make sure that the
engine is running by checking engine
sound or warning and indicator
lights.
NOTICE
Do not shift the gearshift lever into
"R" while moving forward, or the
transmission may be damaged. If you
shift into "R" when the vehicle speed
is over 10 km/h (6 mph), the transmis-
sion will not shift into reverse.
OPERATING YOUR VEHICLE
NOTE:
For Hong Kong models, the warning
buzzer of Reverse position sounds when
you shift into Reverse to notify the driver
that the gearshift lever is in "R" range. The
warning buzzer of Reverse position is not
used for notifying the vehicle's reverse to
persons outside the vehicle.
N (Neutral)
Use this position for starting the engine if
the engine stalls and you need to restart it
while the vehicle is moving. You may also
shift into Neutral and depress the brake
the
pedal to hold the vehicle stationary during
idling.
D (Drive)
Use this position for all normal driving.
With the gearshift lever in "D" range you
can get an automatic downshift by press-
ing the accelerator pedal. The higher the
vehicle speed is, the more you need to
press the accelerator pedal to get a down-
shift.
M (manual mode) (models with manual
mode)
Use this position for driving in the manual
mode.
Refer to "Manual mode" later in this section
for details on how to use the manual mode.
3-20