INSPECTION AND MAINTENANCE
• Class 1: K12C engine
• Class 2: K12M engine
• Class 3: K12D engine
Interval: This interval should be judged by
odometer reading or months, whichever comes
first.
ENGINE
*1-1. Engine accessory drive belt
*1-2. Valve clearance
1-3. Engine oil and engine oil filter
1-4. Engine coolant
*1-5. Exhaust system (except catalyst)
IGNITION
2-1. Spark plugs
FUEL
1
3-1. Air cleaner filter element*
*3-2. Fuel lines
*3-3. Fuel filter
*3-4. Fuel tank
EMISSION CONTROL SYSTEM
*4-1. PCV valve
*4-2. Fuel evaporative emission control system
#1: Valve clearance for K12C and K12D engine models is not required for maintenance.
#2: Perform the engine coolant level check under the daily inspection in the "OPERATING YOUR VEHICLE" section.
If you use the engine coolant other than "SUZUKI LLC: Super (Blue)" for replacement, follow the schedule of "SUZUKI LLC: Stan-
dard (Green)".
7-9
[Class 1]Tension check, *Replacement
[Class 2] Tension check, *Adjustment, *Replacement
[Class 3]Tension check, *Replacement
[Class 2] (#1)
SUZUKI LLC: Super (Blue) (#2)
SUZUKI LLC: Standard (Green)
[Class 1, 3] Iridium plug
[Class 2] Nickel plugs
km (x1000)
7.5
miles (x1000)
4.5
months
6
–
–
I
–
R
First time only: Replace at 150000 km (90000 miles) or 96 months.
Second time and after: Replace every 75000 km (45000 miles) or 48 months.
–
–
–
Replace every 10000 km (6000 miles) or 8 months.
Inspect every 2500 km (1500 miles).
Replace every 30000 km (18000 miles) or 24 months.
–
Replace every 105000 km (63000 miles).
–
Inspect every 80000 km (50000 miles) or 48 months.
–
15
22.5
30
37.5
9
13.5
18
22.5
12
18
24
30
I
–
I
–
I
–
I
–
I
I
I
R
–
–
I
–
R
R
R
R
–
–
–
–
–
–
I
–
–
–
R
–
–
–
I
–
–
–
–
–
–
–
–
–
45
27
36
R
R
I
–
R
R
–
–
–
I
–