Suzuki IGNIS 2022 Series Manual page 247

OPERATING YOUR VEHICLE
To set the initial value of tyre pressure
(instrument cluster with tachometer)
NOTE:
For the instrument cluster without tachom-
eter, refer to "Setting mode" in "Information
display (instrument cluster without tachom-
eter)" in the "BEFORE DRIVING" section.
EXAMPLE
(1)
(1) (2)
1) When the ignition switch is in "ON"
position or the ignition mode is ON and
the vehicle is stationary, push and hold
the information switch (1) for more than
3 seconds to change the information
display to the setting mode.
3-85
EXAMPLE
2) Push the brightness control switch (2)
up or down to select "TPMS" and push
the information switch (1).
NOTE:
If you exit the setting mode, select "Back"
and push the information switch (1).
75RM184
EXAMPLE
75RM321
3) Push the brightness control switch (2)
up or down to select "TPMS Mode" and
push the information switch (1).
75RM332