Suzuki IGNIS 2022 Series Manual page 137

BEFORE DRIVING
®
ESP OFF indicator light
(if equipped)
When the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to ON, this light
comes on briefly so you can check that the
light is working.
®
When the ESP OFF switch is pushed to
®
turn off the ESP systems (other than
®
ABS), the ESP OFF indicator light comes
on and stays on.
®
For details of the ESP systems, refer to
"Electronic stability program (ESP
"OPERATING YOUR VEHICLE" section.
2-113
Hill descent control indicator light
(if equipped)
57L30045
When the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to ON, this light
comes on briefly so you can check that the
light is working.
When you push the hill descent control
switch and the hill descent control operat-
ing conditions are fulfilled, the hill descent
control indicator comes on. If the hill
descent control indicator blinks, the hill
descent control will not be activated.
®
)" in the
For details of the hill descent control sys-
tem, refer to "Hill descent control system"
in the "OPERATING YOUR VEHICLE"
section.
Oil pressure light
79K050 When the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to ON, this light
comes on. When the engine is started, the
light goes out. The light will come on and
remain on if there is insufficient oil pres-
sure. If the light comes on when driving,
pull off the road as soon as you can and
stop the engine.
Check the oil level and add oil if necessary.
If there is enough oil, the lubrication sys-
tem should be inspected by your SUZUKI
dealer before you drive the vehicle again.
NOTICE
• If you operate the engine with this
light on, severe engine damage can
result.
• Do not rely on the oil pressure light
to indicate the need to add oil. Peri-
odically check the engine oil level.
50G051