Suzuki IGNIS 2022 Series Manual page 65

BEFORE DRIVING
Seat belt inspection
EXAMPLE
Periodically check if the seat belts work
properly and are not damaged. Check the
webbing, buckles, latch plates, retractors,
anchorages and guide loops. Replace any
seat belts which do not work properly or
are damaged.
2-41
Inspect all seat belt assemblies after
any collision. Any seat belt assembly
which was in use during a collision
(other than a very minor one) should
be replaced, even if damage to the
assembly is not obvious. Any seat
belt assembly even which was not in
use during a collision must be
replaced if the seat belt pretension-
ers activated. The pretensioners and
the load limiter only functions once.
In case they did not activate, consult
with Suzuki dealer.
65D209S
WARNING
Seat belt pretensioner system
and/or
Label
WARNING
This section describes your SUZUKI
vehicle's seat belt pretensioner sys-
tem. Read and follow all these
instructions carefully to minimize
your risk of severe injury or death.
EXAMPLE
63J269