Suzuki IGNIS 2022 Series Manual page 204

(3)
(1)
(1) Cruise switch
(2) "CANCEL" switch
(3) "RES +/SET –" switch
Setting cruising speed
1) Turn on the cruise control system by
pushing cruise switch (1). When the
(2)
cruise indicator (4) (for instrument clus-
ter with tachometer) or cruise indicator
light (6) (for instrument cluster without
tachometer) comes on, you can set
cruising speed.
2) Accelerate or decelerate to the desired
speed.
3) Push down the "RES +/SET –" switch
(3) and turn on the set indicator (5) (for
instrument cluster with tachometer) or
"SET" indicator light (7) (for instrument
75RM114
cluster without tachometer). Take your
foot off the accelerator pedal and the
set speed will be maintained.
If the cruising speed is set by acci-
dent, you cannot decelerate or could
loose control of the vehicle. This
could lead to an accident, resulting in
severe injury or death.
Turn off the cruise control system
and check that the cruise indicator
(4) or cruise indicator light (6) is off
when the system is not in use.
WARNING
OPERATING YOUR VEHICLE
Instrument cluster with tachometer
(4) (5)
(4) Cruise indicator
(5) Set indicator
Instrument cluster without tachometer
(6)
(6) Cruise indicator light
(7) "SET" indicator light
When you push cruise switch (1), the sys-
tem is on and the cruise indicator (4) or
cruise indicator light (6) will come on.
When the vehicle's speed is controlled by
the cruise control system, the set indicator
(5) or "SET" indicator light (7) will come on.
75RM115
(7)
75RM329
3-42