Suzuki IGNIS 2022 Series Manual page 426

(7)
(8)
4) Unscrew the valve cap (7) from the tyre
valve (8). Unscrew the valve insert (9)
by using the enclosed valve insert
remover (4). Place the valve insert (9)
onto clean place for re-use.
WARNING
The valve insert can jump out, if air
remains in the tyre. Be careful when
removing the valve insert.
(4)
(9)
(8)
81PN153
5) Remove the plug from the filler hose (3)
and insert the filler hose into the tyre
valve (8).
6) Hold the bottle (2) with bottom upwards
(3)
81PN248
(8)
(2)
7) Screw the air hose (10) of the compres-
63J349
EMERGENCY SERVICE
and pump the bottle to fill the entire bot-
tle contents (sealant) into the tyre.
Thereafter pull off the filler hose and
firmly screw the valve insert into the
tyre valve again. If the valve insert is
dirty or lost, use the enclosed spare
valve insert.
10 min. Max.
(10)
required
air pressure
(1)
sor (1) to the tyre valve (8). Fit the
power plug (11) to the accessory
socket. For a manual transmission
vehicle, shift from "R" (Reverse) into "N"
(Neutral). Start the engine. Switch on
the compressor. Inflate the tyre to the
required air pressure.
(11)
81PN120
8-8