Suzuki IGNIS 2022 Series Manual page 200

ENG A-STOP OFF switch
This switch can deactivate (OFF) the ENG
A-STOP system.
• To deactivate the system, push the ENG
A-STOP OFF switch (1). The ENG A-
STOP OFF indicator light (2) in the
instrument cluster comes on.
• To activate the system again, push the
switch again until the indicator light goes
off.
• Each time the engine is stopped manu-
ally, the system is activated, and the
ENG A-STOP OFF indicator light goes
off.
(1)
NOTE:
If the ENG A-STOP OFF switch (1) is
pushed while the engine has been stopped
automatically, the engine is restarted auto-
matically and the ENG A-STOP OFF indi-
cator light (2) comes on.
• The ENG A-STOP OFF indicator light
(orange) in the instrument cluster comes
on or blinks in the following cases, not
only to warn you that the ENG A-STOP
system is deactivated. If it blinks, have
the vehicle serviced by a SUZUKI
dealer.
– If the system is operating normally
when the ignition switch is turned to
the "ON" position or the engine switch
is pressed to change the ignition mode
to ON, the indicator light comes on for
(2)
approximately 2 seconds, then goes
off.
– If there is something wrong with the
system, or if it is time to replace the
battery, the indicator light will blink
when the ignition switch is turned to
the "ON" position or the engine switch
is pressed to change the ignition mode
to ON. (The ENG A-STOP system will
not work properly.)
75RM307
OPERATING YOUR VEHICLE
NOTE:
If the indicator light blinks when the engine
has been stopped automatically by the
ENG A-STOP system, the engine may
stall.
75RM237
3-38