Suzuki IGNIS 2022 Series Manual page 109

BEFORE DRIVING
Selector position / Gear position /
Manual mode indicator / S-mode
indicator / Gearshift indicator (if
equipped)
The display (D) shows some of the follow-
ing indications.
EXAMPLE
(5)
(7) (8)
(5) Selector position
(6) Gear position
(7) Manual mode indicator
(8) S-mode indicator
(9) Drive mode indicator
Selector position (for CVT models) /
Gear position (for CVT models with man-
ual mode)
The display shows the transmission selec-
tor position (5) or the gear position (6).
• For CVT models with manual mode;
– When the manual mode is not in use,
the display shows the selector posi-
tion.
– When using the manual mode, the dis-
play shows the current gear position.
2-85
Manual mode indicator
(for CVT models with manual mode)
When you are using the manual mode, the
display shows the manual mode indicator
(7).
S-mode indicator
(for CVT models with switch of S-mode)
If you push the switch of S-mode on the
gearshift lever, the display shows the S-
(6)
mode indicator (8).
(9)
Gearshift indicator (if equipped)
Refer to "Gearshift indicator" in the
"OPERATING YOUR VEHICLE" section.
75RM318
Trip meter (Type 1)
The display (E) shows the trip meter.
The trip meter can be used to measure the
distance traveled on short trips or between
fuel stops.
You can use trip meter A or trip meter B
independently.
To reset the trip meter, push and hold the
trip meter switch (3) until the display shows
0.0.
NOTE:
The indicated maximum value of the trip
meter is 9999.9. When you run past the
maximum value, the indicated value will
return to 0.0.
WARNING
If you attempt to adjust the display
while driving, you could lose control
of the vehicle.
Do not attempt to adjust the display
while driving.