Suzuki IGNIS 2022 Series Manual page 332

Reset to the factory defaults
Follow the instructions below to reset all
the settings to the factory defaults.
®
1) Press the Bluetooth setup button (5)
or (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Setup Bluetooth", and
press the knob (1) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Initialize", and press the
knob (1) to determine the selection.
4) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "All Initialize", and press
the knob (1) to determine the selection.
5) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Confirm", and press the
knob (1) to start the reset.
NOTE:
When selecting "Go Back" or pressing
BACK button (4), the previous menu will
be displayed.
Selection of phone (Select Phone)
Follow the instructions below to select a
phone to be paired with from the registered
phones.
®
1) Press the Bluetooth setup button (5)
or (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Setup Bluetooth", and
press the knob (1) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "List Phone", and press the
knob (1) to determine the selection.
4) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select a phone to be paired with,
and press the knob (1) to determine the
selection.
5) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Select", and press the
knob (1) to determine the selection.
NOTE:
• When selecting "Go Back" or pressing
BACK button (4), the previous menu will
be displayed.
®
• The Bluetooth ready audio device will
be disconnected when the phone is
selected.
OTHER CONTROLS AND EQUIPMENT
List of phones (List Phones)
Follow the instructions below to display the
names of the registered phones in
sequence.
1) Press the Bluetooth
or (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Setup Bluetooth", and
press the knob (1) to determine the
selection.
3) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "List Phone", and press the
knob (1) to determine the selection.
The names of the registered phones
are displayed in sequence.
NOTE:
When selecting "Go Back" or pressing
BACK button (4), the previous menu will
be displayed.
Passkey setting (Set Passkey)
Follow the instructions below to set the
security number (passkey).
1) Press the Bluetooth
or (6).
®
The Bluetooth setup menu will be dis-
played.
2) Turn "TUNE/FLD PUSH SOUND" knob
(1) to select "Setup Bluetooth", and
press the knob (1) to determine the
selection.
®
setup button (5)
®
setup button (5)
5-74