Suzuki IGNIS 2022 Series Manual page 56

Table of Contents

Advertisement

NOTICE
After folding the rear seatback for-
ward, do not allow any foreign mate-
rial to enter the lock opening. This
may cause damage to the inside of
the lock and prevent the seatback
from being locked securely.
WARNING
If you need to carry cargo in the pas-
senger compartment with the rear
seatback folded forward, secure the
cargo or it may be thrown about,
causing injury. Never pile cargo
higher than the seatbacks.
To return the seat to the normal position,
follow the procedure below.
CAUTION
When returning the rear seatback to
the normal position, be careful that
your finger is not caught between the
lock and the striker.
NOTICE
• When returning the rear seatback to
the normal position, check that there
is nothing around the striker. Any
foreign materials prevent the seat-
back from being locked securely.
• When you move a seatback, make
sure the belt webbing is hooked in
the seat belt hangers so the seat
belts are not caught by the seat-
back, seat hinge, or seat latch. This
helps prevent damage to the belt
system.
• Make sure the belt webbing is not
twisted.
Type A
Lock
Black
Unlock
Red
Type B
EXAMPLE
Raise the seatback until it locks into place.
After returning the seat, move the seat-
back forward and backward to check that it
is securely latched.
EXAMPLE
Do not put your hand into the rear
seatback lock opening, or your finger
may get caught and be injured.
After securing the rear seatback,
check that it is locked securely. For
type A seat, if it is not, red will appear
in the release lever.
62R0375
BEFORE DRIVING
75RM104
CAUTION
CAUTION
2-32

Advertisement

Table of Contents
loading

Table of Contents