A3 - Check The Fuel Level; A4 - Check The Tyre Pressure And The Wheel Nut Torque - Manitou MSI 20 D Operator's Manual

A3 - C
HECK THE FUEL LEVEL
Keep the fuel tank full, to reduce as much as possible any condensation due
to the atmospheric conditions.
- Remove cap 1 (Fig. A3).
- Fill the fuel tank with clean fuel (See chapter : LUBRICANTS AND FUEL in
paragraph : 3 - MAINTENANCE), filtered through a strainer or a clean, lint
free cloth, through filler port 2 (Fig. A3).
- Put the cap back 1 (Fig. A3).
Never smoke or approach with a flame during filling operations or when the
tank is open. Never refill while engine is running.
A4 - C
HECK THE TYRE PRESSURES AND THE WHEEL
NUTS TORQUE
- Check the condition of the tyres, to detect cuts, protuberances, wear, etc.
- Check the torque load of the wheel nuts (See fig. A4). Non compliance with
this instruction can cause damage and rupture to the wheel bolts and
distortion to the wheels.
- Check and adjust the tyre pressures if necessary (See chapter :
CHARACTERISTICS paragraph : 2 - DESCRIPTION).
Check that the air hose is correctly connected to the tyre valve before infla-
ting and keep all persons at a distance during inflation. Respect the recom-
mended tyre pressures given.
3 - 11
A2/3
4
5
A3
1
2
A4
WHEEL TORQUE
NUTS LOADING
400 ± 15%
FRONT WHEEL
N.m
110 ± 15%
REAR WHEEL
N.m