Load Handling - Manitou MSI 20 D Operator's Manual

L
OAD HANDLING
WEIGHT OF LOAD AND CENTRE OF GRAVITY
- Before taking up a load, you must know its weight and its centre of gravity.
- The load chart relating to your lift truck is valid for a weight with its centre of
gravity 500 or 600 mm from the heel of the forks (As model of lift truck) (Fig.
A). For a higher centre of gravity, consult your agent or dealer.
- For irregular loads, determine the centre of gravity in the transverse
direction before handling (Fig. B).
TAKING UP A LOAD ON THE GROUND
- Approach the lift truck perpendicular to the load, with the forks in a
horizontal position (Fig. C).
- Adjust the fork spread and centering in connection with the load (Fig. D)
(Optional solutions exist, consult your dealer).
- Move the lift truck forward slowly (1) and bring the forks to stop in front of
the load (Fig. E), if necessary, slightly lift the mast (2) while taking up the
load.
- Apply the parking brake and place the forward/reverse lever in neutral.
- Slightly lift the load (1), incline the mast (2) backwards in the transport
position (Fig. F).
TAKING UP A HIGH LOAD ON TYRES
- Ensure that the forks will easily pass under the load.
- Approach the lift truck perpendicular to the load and with the forks in a
horizontal position (Fig. G) manoeuvring gently and carefully.
1 - 14
A
500 mm
B
C
D
E
1
2
F
2
1
G