Table of Contents
Advertisement
Help Guide
Interchangeable Lens Digital Camera
ILME-FR7 / ILME-FR7K
Checking the Lens Switches
The following checks and settings are required, depending on the type of lens.
For a lens with a zoom switch
Set the switch to SERVO.
If the switch is set to MANUAL, the zoom can only be adjusted using the zoom ring. Zoom control from the unit has no
effect.
For a lens with a focus mode switch
Set the switch to AF/MF or AF.
If the switch is set to MF, the focus can only be adjusted using the lens ring or adjusted manually from a remote control
unit. If the switch is set to Full MF, the focus can only be adjusted using the lens ring.
Note
When using an A-mount lens, manual adjustment from a remote control unit may not be available.
For a lens with an Auto Iris switch
Set the switch to AUTO.
When not set to AUTO, the iris can only be adjusted using the lens ring. Iris operation from the unit has no effect.
For a lens with an image stabilization switch
Set the switch to OFF.
If the switch is set to ON, unexpected behavior may occur during pan/tilt operation.
SELP28135G
A: Set the ZOOM switch to SERVO.
B: Move the focus ring to the forward position (AF/MF mode).
C: Set the image stabilizer switch to OFF.
83
Advertisement
Table of Contents
