Using Ac Power - Sony ILME-FR7 Help Manual

Help Guide
Interchangeable Lens Digital Camera
ILME-FR7 / ILME-FR7K

Using AC Power

This topic describes the procedure to power the unit using AC power.
Slide the pan/tilt lock lever to the LOCK position to lock the pan/tilt of the camera head.
1
Connect the AC adaptor (supplied) to the DC IN connector on the unit, and connect the power cord
2
(supplied) to an AC power source.
A: DC IN connector
B: Power cord
C: AC adaptor
Secure the AC adaptor cord using the cord clamper if you want to prevent the cord from being
3
disconnected.
Unlock the cord clamper, route the cord through the clamper as shown below, and lock the clamper.
96