Table of Contents
Advertisement
Help Guide
Interchangeable Lens Digital Camera
ILME-FR7 / ILME-FR7K
Starting/Stopping Recording
This topic describes how to start/stop recording.
Note
Recording and playback are not supported when the unit is powered via PoE++ power delivery.
Attach the necessary devices, and check that power of the unit and peripheral devices is being supplied.
1
Insert the memory card(s).
2
Check the power status of the unit at the top left of the Web App screen.
3
When power supply is on
When the unit is turned on, [Power ON] is displayed on the power switch at the top of the Web App screen.
The POWER lamp lights up on the front of the unit and the camera image appears on the live operation screen of
the Web App.
Note
If the administrator password has not been configured, a screen prompting you to configure the password appears. See
"Initializing the
When power supply is in standby state
When the power supply of the unit is in standby state, [Power Standby] is displayed on the power switch in the Web
App.
In this state, press the power switch and select [Power ON]. The unit turns on, the POWER lamp lights up on the
front of the unit, and the camera image appears on the live operation screen of the Web App.
Unit."
121
Advertisement
Table of Contents
