Table of Contents
Advertisement
Switching the base sensitivity
Setting the AGC switch to the on position
Switching the power supply of the unit to standby
To temporarily adjust the gain automatically using an assignable button
Press an assignable button assigned with the [Push AGC] function to adjust the gain automatically while the button is
pressed.
The gain returns to manual mode when you release the button.
The adjustment result returns to the preset value configured using [ISO/Gain<L>] after performing any of the following
operations.
Changing ISO/Gain adjustment items
Switching the base sensitivity
Setting the AGC switch to the on position
Switching the power supply of the unit to standby
Note
This function cannot be executed when [Shooting] > [Iris] > [Bokeh Control] is set to [On] in the camera menu.
5-041-957-11(1) Copyright 2022 Sony Corporation
184
Advertisement
Table of Contents
