Table of Contents
Advertisement
Help Guide
Interchangeable Lens Digital Camera
ILME-FR7 / ILME-FR7K
Selecting the Audio Input Device
Set the following switches according to the device connected to the AUDIO IN connector.
When a microphone is connected, set SETUP switch 2 on the connector block on the rear of the unit.
1
CH-1 and CH-2 have common settings.
Setting
Description
OFF
Select when using a dynamic microphone or battery-operated microphone. This turns off the +48 V
(default)
phantom power supply and sets the LINE or MIC input as the CH-1 and CH-2 audio source.
Select when using a +48 V phantom power supply compatible microphone. This turns on the +48V
ON
phantom power supply and sets the phantom power supply compatible microphone as the CH-1 and
CH-2 audio source.
Set the type of connected device using [Audio] > [Audio Input] > [AUDIO IN Select] in the camera menu.
2
Select the audio input using [Audio] > [Audio Input] > [CH1 Input Select] to [CH4 Input Select] in the web
3
menu or camera menu.
Note
Audio is not recorded in Interval Rec mode or Slow & Quick Motion mode.
5-041-957-11(1) Copyright 2022 Sony Corporation
200
Advertisement
Table of Contents
