Sony ILME-FR7 Help Manual page 408

Interchangeable lens digital camera

Hide thumbs Also See for ILME-FR7:

Table of Contents

To start recording on the unit and external device simultaneously

With HDMI signal output enabled, set [TC/Media] > [HDMI TC Out] > [Setting] to [On] and [Project] > [SDI/HDMI Rec

Control] > [Setting] to [SDI/HDMI Remote I/F] or [Parallel Rec] in the camera menu to enable output of a REC trigger

signal to the external device connected to the HDMI OUT connector. This will synchronize recording on the external

device with the unit.

If a connected external device does not support a REC trigger signal, the device cannot be operated.

When [Project] > [SDI/HDMI Rec Control] > [Setting] is set to [SDI/HDMI Remote I/F] in the camera menu, only the REC trigger

signal is output when there is no recording media currently inserted and the record START/STOP button is operated.