Check the mounting status.
9
Specifically, check the following items.
Mounting screws are correctly attached.
Fall prevention wire rope is correctly attached and is not twisted.
Unit is mounted level (without tilt or wobble).
Unit does not spin freely when turned.
Next, attach the lens. See
Attaching/Removing a
Lens,"
Note
After attaching a lens, check that the lens is securely attached.
The lens does not have any protection against falling. Sony can assume no liability for a lens falling from the unit.
"Attaching a
Lens," taking into account the information in
"Checking the Lens
Switches," and
5-041-957-11(1) Copyright 2022 Sony Corporation
"Precautions When Using a Zoom
72
"Precautions when
Lens."