Table of Contents
Advertisement
Help Guide
Interchangeable Lens Digital Camera
ILME-FR7 / ILME-FR7K
Brute Force Attack Protection
Sets settings related to brute force attack prevention.
Sub-item
Item
setting
Setting
On / Off
Count
3 to 100
Release
Always /
Mode
Timer
Release
30 to
Time
86400 s
When an attacker is detected, the attacker list information is displayed.
Factory
default
On
Turns the [Brute Force Attack Protection] function on/off.
Sets the number of attempts that will be considered as an attack.
8
Enabled when [Setting] is set to On.
Sets the release condition.
Enabled when [Setting] is set to On.
Timer
Always: Do not delete from attacker list.
Timer: Delete from attacker list after the release time set using [Release Time]
has elapsed.
Sets the release time.
Enabled when [Setting] is set to On.
60
When Release Mode: is set to [Timer], entries are deleted from the attacker list
after the release time has elapsed.
5-041-957-11(1) Copyright 2022 Sony Corporation
Description
389
Advertisement
Table of Contents
