Checking The Remaining Recording Time - Sony ILME-FR7 Help Manual

Interchangeable lens digital camera

Hide thumbs Also See for ILME-FR7:

Table of Contents

Interchangeable Lens Digital Camera

ILME-FR7 / ILME-FR7K

Checking the Remaining Recording Time

When shooting (recording/standby), you can monitor the remaining capacity of the memory card in each slot using the

slot A/B remaining media indicators in the camera image panel.

The remaining recording time is calculated from the remaining capacity of the media in each slot and the current

recording format (recording bit rate), and is displayed in units of minutes.

Memory card replacement timing

When the total remaining recording time on the two memory cards becomes less than 5 minutes, the message "Media

Near Full" appears and the recording/tally lamp starts blinking to warn you.

Replace with media that has free space.

If you continue recording until the total remaining recording time reaches zero, the message changes to "Media Full" and

recording stops.

Up to approximately 600 clips can be recorded on one memory card.