Table of Contents
Advertisement
Display
Connection speed
100 Mbps
Lit orange
1000 Mbps
Link/ACT LED display status
Indicates the status of the network connection.
Display
Connection status
Not lit
No link
Blinking green
Link established, data active
Lit green
Active link
Note
When connecting this product to the Internet, connect via a system that provides a protection function, such as a router or
firewall. If connected without such protection, security issues may occur.
4.
TC IN connector
Input an external reference timecode signal.
For details, see
5.
HDMI connector
Outputs the video from the unit as an HDMI signal.
For details, see "HDMI connector (Type A connector)" in
6.
HDMI cable retaining plate mounting screw
To prevent the HDMI cable from being removed, attach the supplied HDMI cable retaining plate using the supplied
mounting screw (M2.6×6), and attach the HDMI cable using a commercially available cable tie or band.
For details about attaching the HDMI cable retaining plate, see
7.
OPTION connector
Use to connect a tally signal from an external device.
For details, see
8.
Cord clamper
Use to secure the AC adaptor cord.
9.
RESET switch
Press for at least 5 seconds using the tip of a pen or similar device to reset the settings of the unit to the factory
default values.
You can select whether to reset the network connection settings only or all settings using SETUP switch 1.
10.
OPTICAL output connector
Outputs an SDI signal converted to optical format when an SFP+ module (option) is connected.
For details, see
11.
SETUP switches
"Locking the Timecode to Other
"Connecting a Tally
Signal."
"Outputting an Optical Fiber
Devices."
"Connecting External Monitors and Recording
"Connecting
Signal."
25
Cables."
Devices."
Advertisement
Table of Contents
