Table of Contents
Advertisement
2.
Lens support unit
The lens support can slide forward/rearward according to the lens and then secured.
3.
Lens support pedestal attachment screw
Attach to the lens support pedestal. You can adjust the screw up/down to match the height of the lens support
pedestal.
4.
Lens support rod clamp lever (2 places)
Secures the forward/rearward position of the lens support unit.
5.
Lens support pedestal attachment screw clamp lever
Secures the vertical position of the lens support pedestal attachment screw.
Hint
If a clamp lever is in a position that makes it difficult to turn, release the clamp lever and rotate it to an angle that will make
operation easier. When in the desired position, close the clamp lever.
A: Lens support pedestal attachment screw clamp lever
B: Lens support rod clamp lever
Note
To prevent the lens support unit from interfering with pan/tilt operation, move the lens support unit up against the camera
head when not using the lens support unit, and move the lens support pedestal attachment screw to its highest position
(closest to the lens).
5-041-957-11(1) Copyright 2022 Sony Corporation
34
Advertisement
Table of Contents
