Rdm Functions - ProLights EclPanel TWCXL User Manual

11 - RDM FUNCTIONS

The product can communicate using RDM (Remote Device Management) protocol over a DMX512
Networks.
RDM is a bi-directional communications protocol for use in DMX512 control systems, it is the open
standard for DMX512 device configuration and status monitoring.
The RDM protocol allows data packets to be inserted into a DMX512 data stream without affecting
existing non-RDM equipment. It allows a console or dedicated RDM controller to send commands to
and receive messages from specific fixtures.
The PIDs in the following tables are supported in the product.
DEVICE_MODEL_DESCRIPTION
MANUFACTURER LABEL
DEVICE_LABEL
FACTORY_DEFAULTS
SOFTWARE_VERSION_LABEL
DMX_PERSONALITY
DMX_PERSONALITY_DESCRIPTION
DMX_START_ADDRESS
SENSOR_DEFINITION (LED temperature sensor)
CURVE
CURVE_DESCRIPTION
OUTPUT_RESPONSE_TIME
OUTPUT_RESPONSE_TIME_DESCRIPTION
MODULATION_FREQUENCY
MODULATION_FREQUENCY_DESCRIPTION
DEVICE_HOURS
DISPLAY_INVERT
IDENTIFY_DEVICE
PARAMETER
PROLIGHTS - EclPanel TWCXL
PID GET
0x0080 x
0x0081 x
0x0082 x
0x0090 x
0x00C0 x
0x00E0 x
0x00E1 x
0x00F0 x
0x0200 x
0x0343 x
0x0344 x
0x0345 x
0x0346 x
0x0347 x
0x0348 x
0x0400 x
0x0500 x
0x1000 x
SET
x
x
x
x
x
x
x
x
x
19