Wdmx To Dmx (Rx) - ProLights EclPanel TWCXL User Manual

1.500w tuneable white and colourful led soft light with pixels and lighting effects

Table of Contents

6. On the transmitter, enable TX LINK to ON to link transmitter to the receivers.

7. If the connection is successful and DMX input is available the display the display on the receiver unit

will shows the DMX address. If DMX signal is not available, the display will shows "No signal" but

keeps the transmitter linked.

8. If the connection fails, check the position of the receiver.

9. The wireless icon on the receiver display indicates the received signal strength.

Reset the receiver

Follow the procedure below to reset the receiver.

1. Push MENU button untill you show CONNECT on display, then press ENTER button to confirm.

2. Use UP/DOWN buttons for select Wireless, then press ENTER to confirm.

3. Enable RX RESET to ON.

• The wireless icon on the receiver display indicates the received signal strength.

WDMX TO DMX (RX)

This function enable or disable the retransmission of the wireless DMX signal received throught the

DMX port on the receiver side.

PROLIGHTS - EclPanel TWCXL

Table of Contents