Rdm Functions - ProLights EclFresnel CT+M User Manual

10 - RDM FUNCTIONS

The product can communicate using RDM (Remote Device Management) protocol over a DMX512
Networks.
RDM is a bi-directional communications protocol for use in DMX512 control systems, it is the open
standard for DMX512 device configuration and status monitoring.
The RDM protocol allows data packets to be inserted into a DMX512 data stream without affecting
existing non-RDM equipment. It allows a console or dedicated RDM controller to send commands to
and receive messages from specific fixtures.
The PIDs in the following tables are supported in the product.
CATEGORY
DEVICE_INFO
DEVICE_MODEL_DESCRIPTION
MANUFACTURER_LABEL
Product
Information
DEVICE_LABEL
FACTORY_DEFAULTS
SOFTWARE_VERSION_LABEL
DMX_PERSONALITY
DMX512
DMX_PERSONALITY_DESCRIPTION
Setup
DMX_START_ADDRESS
CURVE
CURVE_DESCRIPTION
Dimmer
Settings
MODULATION_FREQUENCY
MODULATION_FREQUENCY_ DESCRIPTION
SENSOR_DEFINITION
Sensors
SENSOR_VALUE
Display Set-
DISPLAY_INVERT
tings
IDENTIFY_DEVICE
Control
FULL ON
0:HB Mode 1:Studio Mode
PROLIGHTS - EclFresnel CT+M / EclFresnel CT+MIP
20
PARAMETER PID GET SET
0x0060 x
0x0080 x
0x0081 x
0x0082 x x
0x0090 x x
0x00C0 x
0x00E0 x x
0x00E1 x
0x00F0 x x
0x0340 x x
0x0341 x x
0x0342 x x
0x0343 x
0x0200 x
0x0201 x x
0x0500 x x
0x1000 x x
0x8217 x x