Rdm Functions - ProLights EclFresnel 2KTU-DY User Manual

10 - RDM FUNCTIONS

The product can communicate using RDM (Remote Device Management) protocol over a DMX512
Networks.
RDM is a bi-directional communications protocol for use in DMX512 control systems, it is the open
standard for DMX512 device configuration and status monitoring.
The RDM protocol allows data packets to be inserted into a DMX512 data stream without affecting
existing non-RDM equipment. It allows a console or dedicated RDM controller to send commands to
and receive messages from specific fixtures.
The PIDs in the following tables are supported in the product.
Category
Product DEVICE_INFO
Information
DEVICE_MODEL_DESCRIPTION
MANUFACTURER_LABEL
DEVICE_LABEL
FACTORY_DEFAULTS
SOFTWARE_VERSION_LABEL
DMX512 DMX_PERSONALITY
Setup
DMX_PERSONALITY_DESCRIPTION
DMX_START_ADDRESS
Dimmer CURVE
Settings
CURVE_DESCRIPTION
MODULATION_FREQUENCY
MODULATION_FREQUENCY_ DESCRIPTION
Sensors SENSOR_DEFINITION
SENSOR_VALUE
Display DISPLAY_INVERT
Settings
Control IDENTIFY_DEVICE
Parameter
PROLIGHTS - EclFresnel 2KTU-DY / PTU-PDY
PID GET SET
0x0060 x
0x0080 x
0x0081 x
0x0082 x x
0x0090 x x
0x00C0 x
0x00E0 x x
0x00E1 x
0x00F0 x x
0x0343 x x
0x0344 x x
0x0347 x x
0x0348 x
0x0200 x
0x0201 x x
0x0500 x x
0x1000 x x
15