Maserati Grecale 2023 Owner's Manual page 97

one peak value can be displayed at the
same time.
Only in CORSA drive mode it is present
a graphical arc notch inside the circle for
each of the four peaks direction. Every
arc notch has to move (from center to
the edge) following the relative peak
numerical value. The arc notch should
appear if the value is above the threshold
and disappears if timeout expires and
the value is below the threshold.
When the peak visualization timeout
expires and the acceleration is below the
threshold:
• In Comfort, GT, Sport and Off Road the
values textbox should be blank.
• In CORSA drive mode the values
textbox shall show "0.00"and the
relative arc notch should disappear.
When the acceleration end-scale is
reached the outermost ring will blink.
NOTE:
When the internal signal is equal to 0
or Fail status, the G-meter visualization
shall be as the acceleration equals to
0 condition (no digits) and no colored
halo/notch shall be shown. For the base
layout the peak values shall be not
shown; In CORSA mode, with CORSA
layout, has to be shown dashes instead
of digits.
COMPASS
The compass widget contains the
compass pictogram and cardinal
coordinates. The whole graphic shall be
rotated based on the rotation angle.
NOTE:
If the compass is not available, the area
displays dashes " — ".
TIME and WEATHER
Time and Weather widget contains the
following informations:
Dashboard Instruments and Controls
• Time: the time value will be XX (hours
information): XX (minutes information);
12h or 24h format are selectable on
MIA display.
• Date: the date value will be XX/XX/XX.
In setting on MIA display user can
choose one of the three identified
menus: DD/MM/YY - MM/DD/YY or
YY/MM/DD. The format on the cluster
display must be aligned with the one on
MIA display.
• External Temperature: the temperature
value will be XX.X ° when it is displayed
in Celsius format, no decimals are
foreseen when the temperature is
expressed in Fahrenheit format (XX°)
BLANK (no-widget)
No graphical item is displayed in the left
dial on the instrument cluster.
No matter how many enabled widgets
are, the blank position is always the last.
4
95