Maserati Grecale 2023 Owner's Manual page 75

Table of Contents

Advertisement

WARNING!
If, for any reason, the liftgate must
remain open while driving, close all the
windows and activate the fan of the air
conditioning control at the maximum
speed to force the air out of the vehicle
to avoid exhaust emission intrusion. Do
not activate recirculation.
Set the Position of Maximum Power
Liftgate Opening
The maximum opening position of the
liftgate can be modified using the
previously described buttons on the right
side of the outer edge of the liftgate.
1.
Activate the liftgate and stop it in
the new maximum opening position
to be set, by pressing the left
button.
2.
Press the left
or right
buttons and keep it pressed for 3
seconds.
3.
Release the button (pressed in the
previous point). Upon the following
opening controls, the liftgate will
stop in the stored position.
If you want to reset the maximum
possible opening position of the liftgate,
proceed as described below starting
from the previously set opening position.
1.
Manually push the liftgate to
the maximum possible opening
position.
2.
Repeat the previously performed
steps 2 and 3.
Power Liftgate Automatic Safe
Movement
Power liftgate safe opening and closing
is ensured by a protection system able
to stop its movement when an obstacle
is detected along the path: when
opening or closing, it stops automatically
and then slightly moves back.
After the closing/opening command,
when power liftgate starts
closing/opening, all the indicators will
blink and a chime will sound to warn
anyone within range.
When power liftgate edge reaches the
car body, the motor locking the latch is
activated automatically.
Before Starting
If necessary, the power liftgate can also
be opened or closed manually. This
operation could be required when the
liftgate remains open for a long period of
time.
NOTE:
Frequent activations of the anti-pinch
protection function may disable the
automatic movement of the liftgate.
To reactivate this function, perform a
reset cycle by carrying out a complete
opening/closing sequence, after
manually closing the liftgate.
WARNING!
Activate power liftgate/Hand free only
when vehicle is at a standstill to not
obstruct rear visibility.
Always pay utmost attention when
opening and closing the liftgate. If
for any reason the protection system
might fail to respond, it could cause
injury to anyone within the operating
area.
After the closing command, always
make sure that power liftgate/Hand
free is completely closed.
3
73

Advertisement

Table of Contents
loading

Table of Contents