Maserati Grecale 2023 Owner's Manual page 134

Dashboard Instruments and Controls
Parking Lights
All parking lights can be activated via
soft-key only when in Key off.
Together with the parking lights are also
turned on the number plate lights.
Parking lights left or right side separately
can be activated via soft-key in the light
menu on the Comfort Display only when
in Key off.
4
If you want to leave only those on one
side (right/left) switched on, you need to
select only one of the two soft-keys: the
left one to leave the parking lights on the
left side on, the right one to leave those
on the rights side on.
Daytime Running Lights (DRL)
DRL are activated in AUTO mode during
day time.
The use of low beams deactivates the
DRL to activate parking lights.
132
During night time, the use of AUTO mode
deactivates the DRL to activate parking
lights.
Together with the DRL lights are also
turned on the number plate lights.
NOTE:
In countries where DRL use is not
required, these lights can be switched
off.
Low and High Beam Lights
Low beam lights can be switched on
manually or automatically in AUTO
mode based on the ambient brightness
detected by the twilight sensor. Both
modes are activated using the soft-keys
in the light menu on the Comfort Display.
With low beam lights switched on
manually or automatically in AUTO
mode, the high beam lights can
be switched on pushing the left
multifunction lever towards the
instrument cluster.
With high beam lights on, the
indicator light on the 8a.4 area of the
instrument cluster will come on at the
same time.
The high beam lights are switched off
by pushing the left multifunction lever
again. The indicator light switches
off on the instrument cluster.
Twilight Sensor
This is composed by an infrared LED
sensor on the windscreen that works
in conjunction with the rain sensor. It is
able to detect variations in the outside
light level based on the light sensitivity
set through the MIA system.
The twilight sensor sensitivity can be
adjusted according to 3 levels:
• level 1: minimum sensitivity;
• level 2: average sensitivity;
• level 3: maximum sensitivity.
The higher the sensitivity set, the lesser
is the external light variation needed to
switch the lights on (e.g. with a setting
on level 3 at sunset the headlights come
on earlier than levels 1 and 2).
The functionality of the twilight sensor
is essential for the management of the
external lights when the AUTO mode is
selected.
Blinking
The flashing of the high beam lights is
activated by pulling the left multifunction
blue