Maserati Grecale 2023 Owner's Manual page 213

instance highway sections where there
are men at work.
• When entering a junction lane or a
slip road to leave the highway; when
driving on narrow, icy, snowy, slippery
roads, or on steep up and downhill
roads.
• The system is designed and calibrate
for car with no trailer.
• When circumstances do not allow to
drive safely at constant speed.
Displayed Information
ACC condition, as well as the ALM and
ADA status, is displayed on display
after selecting "Driver Assist" menu
(see "Main Menu Contents" in section
"Dashboard Instruments and Controls").
Displayed information depends on
system status: ready, set, temporarily
canceled or override.
Apart from the image at the center of
the display, ADAS systems status is
represented by icons at the top left and
right of the display. These icons remain
displayed even when you exiting the
"Driver Assist" screen.
ADAS system status is also displayed in
the right digital dial (ADAS area) when
the main menu is not in "Driver Assist"
screen.
The vehicle(s) and horizontal bars
represent the ACC status as ready
(white) or with sensed vehicle ahead
(green); the white, gray, green or yellow
lines represent the ALM and ADA
systems.
The ACC screen can be displayed any
time driver changes system status or
settings.
System Controls and Activation
Conditions
The "pulse activation" buttons on
steering wheel R/H side control ACC
operation and the other functions/driver
assist systems installed to this vehicle.
1. Multifunction control shared by all
driver assist functions/systems:
- SET+ / SET - : Increase / Decrease
speed, set current speed.
- RES: Resume previously set speed
when system is in canceled status.
- CANC: Cancel the function if it
was in set status, going in a ready
condition but remembering the
previous set speed.
Driver Assistance Systems
2. ACC time gap: pressed and
released; set the distance to sensed
vehicle ahead as horizontal bars
(setting cycle starts to 4 bars).
3. ACC ON/OFF button.
NOTE:
Any change made to tire dimensions
affects performance of Adaptive Cruise
Control and Forward Collision Warning.
The ACC is not activated or engaged in
the following conditions:
• When braking.
• Anti-Lock Brake (ABS) kicks in.
• When parking brake is activated.
• When automatic transmission is in P
(Park), R (Reverse) or N (Neutral) mode.
• When vehicle speed is out of preset
speed range.
• When brakes are too hot.
• When driver door is open below 5 mph
(8 km/h).
• When the driver's seat belt is
unbuckled below 5 mph (8 km/h).
• When the road is particularly steep
(both uphill and downhill) at low speed.
• The Electronic Stability Control and the
Traction Control System (ESC/TCS)
activate.
• When there is an object too close in
front of the vehicle.
It is possible that more than one system
is active at the same time such as ACC
and ADA just to mention some.
6
211