Maserati Grecale 2023 Owner's Manual page 172

Table of Contents

Advertisement

Starting and Driving
(Continued)
During "Launch Control" ACC (if
equipped), FCW and ADA (if equipped)
are temporarily disabled.
Each step displayed on the instrument
cluster has a time out approximately of
5 seconds.
"Launch Control" maneuver requires
to use both feet, left foot to brake and
right foot to accelerate at the same
time.
With engine on, parking brake
disengaged, brake pedal pressed and
steering wheel straight, pull "–" left
paddle. The instrument cluster shows
the "Launch Control" engaged page.
5
To confirm the procedure, pull again the
"–" paddle. To abort the procedure, pull
"+" right paddle.
To confirm the "Launch Control"
sequence, press full the brake pedal
as indicated in the message on the
instrument cluster until the green zone
170
of the brake pressure percentage bar is
reached.
With brake pedal pressed full with left
foot, fully press the accelerator pedal
(with right foot) as indicated in the
message on the instrument cluster.
Release brake pedal. The launch of the
vehicle starts with ESC that manages
the maximum performance and
engine torque calibrated to maximize
performance. Maximum performance is
achieved if driver let the engine rpm
stall above 2500 rpm before releasing
brake pedal.
During the acceleration phase the
"Launch Control" symbol appears at the
top of the central dial in the instrument
cluster display.

Advertisement

Table of Contents
loading

Table of Contents