Maserati Grecale 2023 Owner's Manual page 274

Maintenance and Care
ranges indicated on the reservoir and
inside the filler neck.
• When additional engine coolant
(antifreeze) is needed to maintain the
proper level, it should be added to the
coolant reservoir after removing the
cap. Do not overfill.
8
• Once the desired level is reached,
reassemble and firmly close cap of the
reservoir.
• If frequent engine coolant (antifreeze)
additions are required, or if the level in
272
the coolant recovery reservoirs does
not drop when the engine cools, the
cooling system should be tested by an
Authorized Maserati Dealer.
• Keep the front of the radiator and the
condenser clean.
WARNING!
• Never add engine coolant (antifreeze)
when the engine is hot. Do not loosen
or remove the cap of the engine
coolant reservoir to cool a hot engine.
Heat causes pressure to build up in the
cooling system. To prevent scalding
or injury, do not remove the pressure
cap while the system is hot or under
pressure.
• When adding coolant do not use
a pressure cap other than the one
specified for your vehicle. Personal
injury or engine damage may result.
Brake Fluid Level Check
Check the fluid level immediately
if the brake system warning light
(United States market) or
(Canadian market) and the related
message turn on indicating a low level of
brake fluid.
• Remove the brakes fluid reservoir
access cover.
• Clean the top of the master cylinder
reservoir before removing the cap.
• Add fluid to bring the level up to
the "MAX" mark on the side of the
master cylinder reservoir. Use only
manufacturer's recommended brake
fluid (see : "Refilling Table" in
section "In an Emergency").
• Once the correct level is reached, firmly
close the cap.
Normal brake pad wear could cause
the fluid level to fall. However, low fluid