Maserati Grecale 2023 Owner's Manual page 141

NOTE:
For vehicles equipped with Remote
Start, the Air Conditioning System
will not function during Remote Start
operation if the climate control is left in
"OFF".
The menu will switch on again touching
the soft-key indicated in picture.
2. A/C
Touch the "A/C" soft-key to change the
current air conditioning setting; the soft-
key illuminates when the A/C is on.
3. Driver temperature control
Provides the driver with independent
temperature control. Touch the blue
soft-key for cooler temperature.
Touch the red soft-key for warmer
temperature. Between the arrows, the
current temperature is displayed
NOTE:
In "SYNC" mode, this control will also
automatically and simultaneously adjust
the passenger temperature.
4. Passenger temperature control
Provides the passenger with
independent temperature control.
Touch the soft-key for cooler
temperature. Touch the soft-key
for warmer temperature. Between the
arrows, the current temperature is
displayed.
NOTE:
Pressing the 4 button/soft-key while
in "SYNC" mode will automatically exit
"SYNC" and it is possible to adjust the
temperature on the passenger side.
5. Recirculation
Press to change the current setting, the
relevant soft-key illuminates to indicate
which recirculation function is activated.
For further details, see paragraph "Dual
zone Climate Control Functions" in this
chapter.
6. Blower control
Blower control is used to adjust the
amount of air forced through the climate
system. Eight levels of blower speed can
be selected. Adjusting the blower will
cause automatic mode to switch to
manual.
Dashboard Instruments and Controls
Touch the − or + arrow to select the
blower speed you want to set.
7-8. AUTO
This function automatically controls
the interior temperature by adjusting
the air flow rate and the air distribution
respectively on the driver and on the
passenger zone. Press "AUTO" to switch
the ATC between manual and automatic
mode. The "AUTO" soft-key illuminates
in amber when the automatic function is
activated. See "Automatic Temperature
Control (ATC)" in this chapter for more
information.
9. MAX defrosting/demisting
Press the soft-key to switch the airflow
setting to the windshield and the front
side windows to get quick defrosting/
defogging. The soft-key illuminates in
amber when this function is activated.
Operating this function will cause the
ATC to switch into manual mode:
the "AUTO" soft-key will turn off.
With engine off, the blower will run at
minimum speed (level 1) and can be
increased manually: with engine on, the
blower speed will gradually increase
to the higher speed (level 8). MAX
defrosting/demisting shall also involve
REAR defrosting/demisting function. If
this function is turned off the climate
system will return to the previous
setting.
4
139