Maserati Grecale 2023 Owner's Manual page 177

Table of Contents

Advertisement

(Canadian market) will flash for 10
seconds.
WARNING!
In the event of an EPB failure, take
your vehicle to the nearest Authorized
Maserati Dealer as soon as possible.
United States Market
Canadian Market
Initialize the EPB System after
Re-connecting the Vehicle Battery
After the detachment and the
subsequent connection of the battery,
on the instrument cluster display the
warning light
will be illuminated.
To initialize the EPB system, lift, release
and lift again the lever located under the
driver lower side of the dashboard.
After having initialized the EPB system,
the error messages regarding the
unavailability of the radar functions
shown in the pictures will be displayed
on the instrument cluster. In the next key
cycle, the messages will no longer be
present.
Emergency Disengagement
In case of brake lock with complete
electrical system failure, it is necessary
to force the electric actuator on the rear
calipers (see "Emergency Release of the
Starting and Driving
Parking Brake" chapter in section "In an
Emergency").
EPB Operation with Overheated
Brakes
Driving on mountain roads with steep
slopes or a sports use of the vehicle
could overheat the brake system
components. In these conditions, parking
brake must not be used since the push
of the power actuator might not be
sufficient to ensure vehicle braking,
especially on a slope.
Drive normally without braking to
allow the brakes to cool down a few
minutes before stopping. In this way,
the automatic or manual activation of
the parking brake will ensure vehicle
braking.
Parking
Before leaving the vehicle, make sure
that the parking brake is fully applied
in automatic or manual and move
the transmission in P (Park) mode by
pressing the brake pedal and the "P"
button.
5
175

Advertisement

Table of Contents
loading

Table of Contents