Table of Contents
Advertisement
•
if on/off setting (example:
"Touchscreen Beep") touching on the
option select/deselect the option
(check mark appear/disappear). The
same behavior is performed touching
on the entire row area;
•
if one-of-many option setting
(example:"English" under "Language"
function) touching on the option do not
perform action (maintain the check
mark). Also in this case, the same
behavior is performed touching on the
entire row area.
When in a function with +/- soft-key:
•
if touch on the +/- soft-key, increase or
decrease the value. Touching outside
the +/- soft-key do not perform action;
•
when the maximum value +/- is
reached, +/- the soft-key turn gray.
Once the procedure is completed, touch
the
back arrow to return to the
previous menu.
In this mode the MIA system allows you
to access the following programmable
functions: Display, My Profile, Safety
& Driving Assistant, Clock & Date,
Phone/Bluetooth, Voice, Navigation,
Camera, Mirrors & Wipers, Lights,
Brakes, Doors & Locks, Seats & Comfort,
Key Off Options, Suspension, Audio,
Notifications, Radio Setup, Geolocation,
Software Updates, System Information
and Reset.
Display
Touch this soft-key to set the following
modes.
•
Language
When in this display, you can
select one language for all display
descriptions, including the trip
functions and the navigation system (if
equipped). The available languages are
specific to the target markets.
•
Display Mode
When in this display, you can select
"Auto" or "Manual" mode.
•
Display Brightness Headlights On
When "Display Mode" function is in
"Manual" mode, you can select the
brightness with the headlights on (night
condition). Adjust the brightness from
level 0 to 10 with the "+" and "–" setting
soft-keys.
•
Display Brightness Headlights Off
When "Display Mode" is in "Manual"
mode, you can select the brightness
with the headlights off (day condition).
Adjust the brightness as previously
explained for "Headlights On" setting.
•
Units
When in this display, you can custom
each unit of measure that can be
independently displayed in the cluster
Display and in the navigation system (if
equipped). The following selectable
units of measure are listed below:
Dashboard Instruments and Controls
-
Speed unit:
select from: "mph" or "km/h".
-
Distance unit:
select from: "mi" or "km".
-
Pressure unit:
select from: "psi", "kPa" or "bar".
-
Temperature unit:
select from: "°F" or "°C".
-
Fuel Consumption unit:
select from: "MPG (US)", "MPG (UK)",
"l/100km" and "km/l".
-
Power unit:
select from: "HP (US)", "HP (UK)" or
"kW".
-
Torque unit:
select from: "lb-ft" or "Nm".
•
Touchscreen Beep
When in this display, you can turn on
or shut off the sound activated by
pressure of a touchscreen soft-key.
•
Show Main Category Bar Labels
By selecting this function, the system
shows the labels on the soft-keys of
the main category bar.
•
Navigation Turn-by-Turn Displayed in
Cluster
By selecting this function, the next turn
direction will appear on the instrument
cluster along a programmed route until
the desired destination is reached.
•
Phone Pop-ups Displayed in Cluster
When this mode is selected a pop
up message will appear in case of
4
117
Advertisement
Chapters
Table of Contents
