Maserati Grecale 2023 Owner's Manual page 146

Dashboard Instruments and Controls
5. Blower control
Blower control is used to regulate the
airflow of the rear climate system.
There are eight blower speeds available.
Adjusting the blower will cause the
automatic mode to switch to manual.
Press the "+" icon to increase blower
speed.
Press the "-" icon for lower speed.
It is also possible to change the blower
speed swiping on the bars between the
arrows.
4 Airflow distribution modes
The airflow distribution can be adjusted
to let air come in from the adjustable
and fixed central tunnel vents and floor
vents. The set mode is recognizable
through the lighting of the soft-key on
the climate control panel.
6. "Bi-Level" mode
Air comes from the adjustable vents on
the rear central tunnel and from the fixed
ones under the front seats.
NOTE:
The Bi-Level mode is designed to
provide comfort by sending cooler air
out of the central tunnel vents and
warmer air from the floor vents.
7. Left passenger heated seat (if
equipped)
Touch the soft-key on the Rear Climate
Control Panel to activate the seat
144
heating. The seat is provided with
three levels of heating. Every level is
represented by the number of arrows on
the seat image and red lines nearby.
Select the level of seat heating by
touching more than once the soft key.
8. Right passenger heated seat (if
equipped)
Touch the soft-key on the Rear Climate
Control Panel to activate the seat
heating. The seat is provided with
three levels of heating. Every level is
represented by the number of arrows on
the seat image and red lines nearby.
Select the level of seat heating by
touching more than once the soft key.
9. AUTO
This function automatically controls the
interior temperature by adjusting the air
flow rate and the air distribution.
• Press the "AUTO" button: the automatic
rear climate control switches from
manual to automatic mode and vice-
versa. The "AUTO" LED on the rear
climate control panel illuminates when
this function is activated.
• Adjust then the temperature you
wish to maintain by regulating the
temperature arrows. Once the desired
temperature is set, the system will
achieve and automatically maintain that
comfort level.
• When the system is set up for your
comfort level, it is not necessary
to change the settings anymore:
simply allow the system to function
automatically.
To provide you with maximum comfort
in the automatic mode, during cold start-
ups the blower speed will remain low
until the engine warms up.
NOTE:
If a fail of the three-zone climate
controls panel occurs, one or more leds,
except the rear display, will switch off.
In this case, contact an Authorized
Maserati Dealer.
Three-Zone Climate Control by the
Driver
When the car is equipped with the
additional three-zone module in the
Comfort Display is present a Rear Menu
on the side bars.
Once you have entered the rear menu,
by touching the following soft-keys, the
driver is able to: