Maserati Grecale 2023 Owner's Manual page 147

1 Turn off / re-activate the rear
climate setting
2 The system switch the ATC
between manual and automatic
mode by controlling the interior
temperature (controls 3) by
adjusting the air flow rate and the
air distribution (controls 5) of the
rear passengers.
3 Adjust the temperature in the rear
zone in the indicated mode for the
front zones.
4 Block the settings of the rear
climate
5 Set the airflow distribution in
"Torso", "Bi-Level" or "Floor" mode.
6 Synchronise the rear passenger
temperature setting with the same
one of the driver. If the driver adjust
the temperature while SYNC mode
is on, this will affect the rear
passenger temperature. If the front
or rear passengers adjust the
temperature setting the system
automatically break the function
and turn it off.
7 Set the blower speed through eight
speed levels.
8 Left passenger heated seat (if
equipped): Touch the soft-key
to activate the seat heating. The
seat is provided with three level of
heating. Every level is represented
by the number of arrows on the
seat image and red lines nearby.
Select the level of seat heating by
touching more than once the soft
key.
9 Right passenger heated seat (if
equipped): Touch the soft-key
to activate the seat heating. The
seat is provided with three level of
heating. Every level is represented
by the number of arrows on the
seat image and red lines nearby.
Select the level of seat heating by
touching more than once the soft
key.
Operating Tips
• Continuous use of the air recirculation
in winter, in rainy weather or humid
climate is not recommended because it
may cause window fogging.
• Interior fogging on the windshield
can be quickly removed by fast
defrosting/demisting. The "Mix"
Dashboard Instruments and Controls
mode can be used to maintain a clear
windshield and provide sufficient
heating. If side window fogging
becomes a problem increase blower
speed.
NOTE:
• Recirculation mode without A/C should
not be used for long periods of time, as
fogging may occur.
• If inside the passenger compartment
there are conditions of high
temperature and humidity, when the
A/C compressor is switched on there
may be some cold steam at ventilation
port outlet: this situation is normal
and does not indicate air conditioning
system malfunction.
• Automatic Temperature Controls
(ATC) will automatically adjust the
climate control settings to reduce or
eliminate window fogging on the front
windshield.
• Make sure the external air intake
grille, located directly in front of the
windshield, is free of obstructions
such as leaves or other objects. Leaves
collected in the air intake may reduce
airflow, and if they enter the plenum,
they could plug the water drains. In
winter make sure the air intake is clear
of ice, slush, and snow.
• The temperature can be displayed
in Metric or US units by selecting
4
145