Table of Contents
Advertisement
Dashboard Instruments and Controls
incoming call. Information associated
to call in progress are available by
entering to the "Audio" menu using the
buttons on the steering wheel LH side.
•
Cluster Options
When in this display, you can custom
all secondary settings listed below,
displayed in the instrument cluster:
-
Trip B on Cluster
-
Performance Pages on cluster:
select the favourite Main Menu
Performance visualization for each
Drive Mode.
4
-
Custom Areas on Cluster:
customize the upper left (10a) and
right (10b) area on the instrument
cluster with "time", "date", "external
temperature", "compass" or "empty"
space.
-
Widget List:
select which additional widget can be
visualized in the widget menu on the
instrument cluster.
-
Cluster Secondary Content:
select "Instruction Text" to show
instructions to navigate the instrument
cluster.
•
Head Up Display
When in this display, you can
activate/deactivate or custom the Head
Up Display:
-
Head Up Display
select from: "On" or "Off".
118
-
HUD Brightness:
adjust the brightness from level 0 to
10 with the "+" and "–" setting soft-
keys.
-
HUD Height:
adjust the height from level 0 to 10
with the "+" and "–" setting soft-keys.
-
HUD Content:
select the visualization between:
"Simple", "Standard" or "Advanced".
My Profile
Touch this soft-key to custom a list of
settings, linked to the chosen profile,
extracted by each setting sub-menu.
Safety & Driving Assistant
Touch this soft-key to set the following
modes.
•
Forward Collision Warning /
Pedestrian Emergency Braking
The FCW function primary use the front
radar and the forward looking camera
for sensing vehicle and pedestrian
ahead, provide warnings to the driver
and may perform brakings and brake
jerks (if set).
FCW is always active: it is possible to
set the warnings, the sensitivity and the
aid of the active braking.
FCW warnings can be set in "Off",
"Only Active Braking" (default mode)
and "Warning + Active".
FCW sensitivity can be set to "Near", to
"Med (Medium)" or to "Far".
The default status of FCW sensitivity is
the "Med" setting.
FCW with active braking can be set to
"On" or "Off".
See "Forward Collision Warning - FCW"
in section "Driver Assistance Systems"
for more details.
•
Pedestrian Emergency Braking (
PEB can be set in "Off" or "Warning +
Active Braking".
•
Active Lane Management
Activating this function the ALM
system will attempt to keep the vehicle
in lane and can apply direct input
to electric power steering system to
change direction of vehicle.
The system can be set to "Vibration
only", "Steering Assist only" and
"Vibration + Steering Assist".
lane Warning can be set to "Early"
(default mode), "Medium" and "Late".
Vibration Strength can be set to "Low"
(default mode), "Medium" and "High".
Steering Assist Strength can be set to
"Low" (default mode), "Medium" and
"High".
•
Traffic Sign Assist
Activating this function the forward-
facing digital camera, with the aid of
maps on the navigation system, is able
to detect signs (no overtaking, etc.)
)
Advertisement
Chapters
Table of Contents
