Paradox SP5500+ Programming Manual page 4

Feature Select Programming Method
After entering certain sections, eight options will be displayed. In these instances, each option (from 1 to 8) represent a specific
feature. To turn enable the option, press the key corresponding to the desired option. Press the key again to remove the digit,
thereby, disabling the option. Press
and advance to the next section.
Viewing Version Numbers
Table 1: Viewing panel and keypad version numbers
Step Action
Enter viewing mode:
• For panel version, enter section [980]
1
• For keypad version, enter installer programming,
then press and hold
2 Press
ENTER
3 Press
ENTER
4 Press
ENTER
01.42
Example: Version
NOTE: For keypads K10V/H and K636, the keypad version numbers cannot be viewed.
Decimal and Hexadecimal Programming
Table 2: Decimal and hexadecimal values for 10 and 32-Zone LED keypads
Value or Action
Value 0/replace current
digit with 0
Values 1 to 9
A (hex only)
B (hex only)
C (hex only)
D (hex only)
E (hex only)
F (hex only)
Exit without saving
Save data (hex only)
4
to disable all eight options. When the options are set, press
SLEEP
ARM
Digits 1-4
Key
Erase digit and remain in section
SLEEP
1 to 9
0
OFF
BYP
MEM
TBL
Arm and Stay LEDs flash
CLEAR
Advances to next section
ENTER
Details
The first digit is displayed
(usually 0)
The second digit is displayed
The third digit is displayed
The fourth digit is displayed
Result
32-Zone LED
Erase digit and remain in section
Zone 1 to 9
Zone 10
Zone 11
Zone 12
Zone 13
Zone 14
Zone 15
ENTER
When Viewing Keypad Version
Digit 1: is illuminated
ARM
Digit 2: is illuminated
SLEEP
Digit 3: is illuminated
STAY
Digit 4: is illuminated
OFF
10-Zone LED
Keys 1 to 9
Key 0 (10)
OFF
BYP
MEM
TBL
Arm and Stay LEDs flash
Advances to next section
to save your settings