Paradox SP5500+ Programming Manual page 18

Description of Events
Table 10: List of events
Event Group Event Group Description
00 Zone OK
01 Zone open
02 Partition status
03 Bell status (partition 1 only)
06 Non-reportable event
18
Sub-group Sub-group Description
01 to 32 Zone number
99 Any zone number
00 to 01 -
02 Silent alarm
03 Buzzer alarm
04 Steady alarm
05 Pulsed alarm
06 Strobe
07 Alarm stopped
08 Squawk ON (partition 1only)
09 Squawk OFF (partition 1 only)
10 Ground start (partition 1 only)
11 Disarm partition
12 Arm partition
13 Entry delay started
14 Exit delay started
15 Pre-alarm delay
16 Report confirmation
99 Any partition status event
00 Bell OFF
01 Bell ON
02 Bell squawk arm
03 Bell squawk disarm
99 Any bell status event
00 Telephone line trouble
01 + , or
CLEAR ENTER
02 -
03 Arm in Stay mode
04 Arm in Sleep mode
05 Arm in Force mode
06 Full arm when armed in Stay mode
07 PC fail to communicate (partition 1 only)
08 Utility key 1 pressed (keys 1 and 2; partition 1 only)
09 Utility key 2 pressed (keys 4 and 5; partition 1 only)
10 Utility key 3 pressed (keys 7 and 8; partition 1 only)
11 Utility key 4 pressed (keys 2 and 3; partition 1 only)
12 Utility key 5 pressed (keys 5 and 6; partition 1 only)
13 Utility key 6 pressed (keys 8 and 9; partition 1 only)
14 Tamper generated alarm
15 Supervision loss generated alarm
16 -
17 -
18 -
19 -
20 Full arm when armed in Sleep mode
21 Firmware upgrade (partition 1 only; non-PGM event)
22 -
23 StayD mode activated
24 StayD mode deactivated
SP+ Series Programming Guide
was pressed for 3 secs. (partition 1 only)