Huawei UPS5000-E-600K-SC User Manual page 66

UPS5000-E-(600 kVA-800 kVA)
User Manual
Figure 3-25 Removing the switch extension poles (600 kVA)

The removed screws, washers, and switch extension poles should be kept in good
condition and reinstalled after cables are connected.

Keep the dowel leveled, as shown in
extension pole until it is fully inserted, place the spacer, and tighten the slotted screw.
Step 11 Install soft connecting copper bars between power cabinet 1 and its adjacent bypass cabinet.
The following describes the methods for the 600 kVA UPS and 800 kVA UPS separately.

Issue 02 (2016-01-20)
600kVA UPS
a. Remove the battery copper bar assembly, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 3-24 and Figure
3 Installation
3-25. Insert the switch
Figure 3-26.
58