Setting Up The Redcat; Unpacking Your System; Determine Set-Up Method; Selecting A Location For The Redcat (Tabletop Setup) - Lightspeed REDCAT User Manual

SETTING UP THE REDCAT

UNPACKING YOUR SYSTEM

Ensure that you have received all of
the components of your system.
• REDCAT™receiver/amplifier and
power supply
• LT-71 LightMic
• BC-TXLT transmitter wall charger
• Tabletop stand (attached to the
REDCAT) and wall-mount bracket
• Optional: second LightMic or
IR handheld microphone
SELECTING A LOCATION FOR THE REDCAT
Find a flat surface and
1. Set it up.
keep in mind the following:
• Power Source
Within 7 feet of an electrical outlet
• Proximity
BEST: Along the wall in the back of
the classroom
GOOD: Along either side of the
wall or in a corner
3 | REDCAT Users Manual
™ transmitter
LightSPEED
R E D C A T U s e r M a n u a l

DETERMINE SET-UP METHOD

The REDCAT is shipped with a table
stand connected and ready for use. A
wall bracket is also included.
Advantages of either include:
Tabletop (recommended):
• Virtually no setup time
• Greater flexibility to move to
different locations
Wall-mount:
• More permanent setup
• Greater security
AVOID: Locations next to where
the teacher instructs (can
result in feedback)
• Height
3–6 feet high
2. Plug it in
Uncoil the power cable and plug it
into an electrical outlet.
3. Turn it on
Flip the power switch on and
proceed to page 8 for system
operation instructions.
Tabletop Set-up