Direct Input From External Audio Equipment - Lightspeed REDCAT User Manual

DIRECT INPUT FROM EXTERNAL AUDIO EQUIPMENT

Below are instructions on how to connect an external audio device
like a TV, VCR, DVD, MP3 or computer directly into the REDCAT.
1. Turn
REDCAT all the way down (fully counterclockwise).
both the REDCAT and audio source
3. With
power on, adjust the AUX IN volume control
until the desired level is achieved. NOTE!
Be careful to not to set the volume to high,
as this can distort the speaker and potentially
cause damage.
11 | REDCAT User Manual
1
ADJ ADJ
AUX OUT AUX IN
the aux in volume adjust control on the bottom of the
R E D C A T U s e r M a n u a l
2
ADJ ADJ
AUX OUT AUX IN
a patch cable (not included)
2. Connect
from the audio source into the aux
input jack on the bottom of the
REDCAT.
3
ADJ
AUX OUT AUX IN
ADJ