Normal Operating Modes; Startup Screens - E-Mon Din-Mon D5 Installation Instructions Manual

8.0 NORMAL OPERATING MODES

The Din-Mon Meter is used to monitor electric power usage of individual loads after
TM
the utility meter and store kW and kVAR data for automatic meter reading.
Screen
1 Startup screen 1
2 Startup screen 2
Firmware Code
M
B-IP
B-MSTP
L
Protocol Code
EZ7
B-IP
B-MSTP
LON

8.1 Startup Screens

When the meter starts up, the screen first displays the
meter name and firmware image type.
After approximately 4 seconds, the screen displays
misc. information such as active configurations, meter
configurations, phase, voltage, amperage, calibration
factors, serial number, Date/time and firmware
version.
Description
ModBus RTU and ModBus TCP/IP
BACnet IP on Ethernet, EZ7 on RS-485 only
BACnet MS/TP on RS-485, EZ7 on Ethernet only
LonWorks TP/FT-10, EZ7 on RS-485 only
Active Protocol Selection
EZ7
BACnet IP
BACnet MS/TP
LonWorks TP/FT-10
49
DIN-MON™ SMART METER
Fig. 29. Din-Mon™ Meter
Din-Mon M
Starting Up...
121212r
9600 EZ7 EZ7
3P-208V-100A
0.994 0.99B 1.00
121212r 06.51.01
Firmware Type
Display
62-0442—05