Table of Contents
Advertisement
DIN-MON™ SMART METER
4.5.2 Installing Solid-Core Current Sensor
NOTE: Under no circumstances is this operation to take place without shutting
off the power to the conductor(s) being monitored.
1. With the power off, disconnect the conductor from its breaker or terminal.
2. Slide the solid-core current sensor over the conductor, making sure that the indi-
cator on the sensor is pointing in the direction of the load.
3. Reconnect the conductor.
4. Run the black and white wires from the current sensors to the meter and install
them according to the standard installation diagram.
P/N
50059386-003
50059386-004
62-0442—05
LINE
SOURCE
Fig. 16. Typical Solid-Core Current Sensor.
Fig. 17. Split Current Sensor Dimensions.
AMPS
A
100
2.00
200
2.00
LOAD
C
B
C
0.80
0.75
0.80
0.75
22
B
A
M35103
NOTE
Advertisement
Table of Contents
