Table of Contents
Advertisement
DIN-MON™ SMART METER
4.3 DIN-Rail Mounting
The meter mounts on the DIN Rail using the flex connects at bottom of the enclosure.
To install the meter on the DIN perform the following steps:
1. Holding the meter with its top tilted in towards the DIN rail, hook the two top tabs
on the back of the meter onto the top of the DIN rail.
2. Push down and in to snap the two bottom flex connectors of the meter onto the
DIN rail.
To remove the meter from the DIN rail, perform the following:
3. Push straight up from the bottom to release the top tabs.
4. Rotate the top of the meter out towards you and pull the meter down and away
from the DIN rail to release the bottom flex connectors.
TOP TABS
BOTTOM FLEX
CONNECTORS
NOTE: The meter enclosure is constructed of a plastic base plate and 2 plastic
screw- mounted covers. The enclosure is designed so that the cover
does not need to be removed from the base plate for either mounting or
wiring. Ventilation openings are designed into the cover to allow proper
heat dissipation.
62-0442—05
Fig. 11. DIN Rail (Bottom View).
16
DIN RAIL
M34647
Advertisement
Table of Contents
